|
|
|
|
|
|
|
|
|
|
|
|
|
Welcome to UsedScrewMachines.com, the best place to buy and sell used machinery on the internet. Our more than 100 years of experience assures that you are dealing with a professional company that knows the industry. We thank you for visiting our website and hope that you will call on us for all your future machine tool needs.
 | |
|
AUTOMATIC SCREW MACH., SWISS TYPE, N/C & CNC Tsugami2004 BS20B-III Quote#: 4528 Investment: Call |
|
(1) USED TSUGAMI MODEL BS20B-III SWISS STYLE CNC LATHE,
3/4" WITH FANUC 18iTB CNC CONTROL
NEW IN 2004 WITH ONLY
605 OPERATING HOURS
301 CUTTING HOURS
SPECIFICATIONS:
MAXIMUM BAR DIAMETER: 0.787"
Z1-AXIS TRAVEL (SYNCHRONOUS TO "Z2"): 8.21"
SPEED RANGE OF MAIN SPINDLE (SERIAL INTERFACE): 200 TO 8,000 RPM
HORSEPOWER OF MAIN SPINDLE: 5.0 HP
PROGRAMMABLE SERVO AXIS DESIGNATIONS
"Z1" MAIN HEADSTOCK IN AND OUT: 8.21"
"T1" OD TOOL SLIDE UP AND DOWN: 5.90"
"X1" OD TOOL SLIDE RIGHT AND LEFT: 2.00"
"X2" ID TOOL SLIDE UP AND DOWN: 7.90"
AUXILIARY SLIDE MOTION
"Z2" ID TOOL SLIDE IN AND OUT
(SYNCHRONOUS TO Z1):7.88"
SUB-SPINDLE SPECIFICATIONS
MAXIMUM DIAMETER: .787"
MAXIMUM DRILL CAPACITY MILD STEEL: 3/8"
MAXIMUM TAP CAPACITY MILD STEEL: 5/16"
SPEED RANGE (SERIAL INTERFACE): 200 TO 7,000 RPM
POWER RATING: 3.0 HP AC
SUB-SPINDLE INDEXING: 5 DEGREE INCREMENT
TOOLING SIZES
TURNING: 5/8" SQUARE
ID: 1" ROUND ESX-16 COLLETS
TOOLING SIZES (CONT.):
BACKWORKING: 1/2" ROUND ESX-16 COLLETS
DRIVEN TOOLS: ESX-16 COLLETS
ELECTRICS: 208 VOLTS, 3 PH, 60 CYC
EQUIPPED WITH
FANUC 18iTB CONTROL WITH MANUAL PULSE GENERATOR
GUIDE BUSHING
CHIP CONVEYOR
MIST BUSTER
C-AXIS ON MAIN SPINDLE
5 DEGREE SUB SPINDLE INDEXING
SUB SPINDLE EJECTOR
SPINDLE CHILLER
PARTS CATCHER AND CONVEYOR
IEMCA GENIUS 120 AUTOMATIC MAGAZINE BARLOADER TYPE 37LL
TOOLING CONFIGURATION
(6) OD TOOLS
(4) ID TOOLS (INCLUDING 2 DRIVEN POSITIONS, MAY REQUIRE PURCHASE OF SPINDLE ADAPTOR)
(3) ID/OD BACKWORKING TOOLS
(4) CROSS DRIVEN TOOLS
NOTE: THIS MACHINE WAS INSTALLED IN MAY OF 2005
CONTACT US FOR ADDITIONAL INFORMATION
|
|